Galvatite hot-dip galvanised steel general
Galvatite is a range of hot-dip galvanised steel products available with either a pure zinc coating or an iron-zinc alloy coating.
It offers the economy, strength, and formability of steel combined with the corrosion resistance of zinc.
See the product catalogue for more information.
Overall thickness and width limits
See the product catalogue for the dimensional limits of specific products.
Thickness: -
0.35 - 2.50mm
Width: -
900 - 1850mm
Coil diameter
Inside, 610mm standard, 508mm on request.
Outside, minimum 10/7 x width (limit 2500mm)
Coil weight
Maximum 21kg/mm of width, up to 33 tonnes, but limited to 10/7 x width and by road or rail transport.
Minimum by agreement or 50% of maximum.
Service Quality
Cold-rolled steels are available in surface quality A, B or C.
Coatings
Mass: -
Pure zinc (Z): minimum 30g/m2, maximum 600g/m2.
Iron-zinc (ZF): minimum 30g/m2, maximum 140g/m2.
Finish: -
NA: Normal spangle (Z).
MA: Minimised spangle, as coated surface (Z).
MB: Minimised spangle, improved surface (Z).
MC: Minimised spangle, best quality surface (Z).
RA: Regular (ZF).
RB: Regular improved surface (ZF).
RC: Regular best quality surface (ZF).
Surface treatment
The surface treatments available are O, C, CO, PC, PCO and U.
More information
Comprehensive details of this product are shown in the product catalogue.
